Acid-resistant bonding agent
To be used as primer and moisture barrier prior to application of Alfix Epoxy membrane.
- For interior and exterior use
- High bonding efficiency
- High chemical resistance
Products
-
-
PlaneMix 90 PlusSemi-dry screeding mortar
-
PlaneMix S40Pool and concrete repair mortar
-
PlaneMix 80Fast-track screeding mortar
-
PlaneMix 80 cementRapid setting cement for screeds
-
PlaneMix 100Fast-setting screeding mortar
-
PlaneMix 100 cementFast-setting screeding mortar
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
-
-
TopCoat DesignUltra matt topcoat for levelled industrial looking floors
-
PlaneMix S8 rapidStand firm universal filler
-
PlaneMix 10Self-levelling and smoothing compound
-
PlaneMix S12 rapidSlump-free smoothing and repair mortar
-
PlaneMix 20Self-levelling and smoothing compound
-
PlaneMix 25 exteriorSelf-levelling and smoothing compound. Interior and exterior use
-
PlaneMix 30Self-levelling and smoothing compound
-
PlaneMix 50Self-levelling compound
-
PlaneMix 50 less dustDust reduced self-levelling compound
-
PlaneMix 60Self-levelling fibre-reinforced smoothing compound
-
PlaneMixPrimerPrimer for Alfix PlaneMix levelling compounds
-
PlaneMixBinderAdmix for Planemix levelling compounds
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
Accessories for Alfix PlaneMix
-
-
-
ProFix PlusFlexible dust reduced tile adhesive
- Up to 1200 x 1200 mm -
ProFixFlexible tile adhesive - Light
-
LetFix PlusFlexible low-dust tile adhesive – Light
- Up to 600 x 600 mm -
LetFix less dustFlexible dust reduced tile adhesive - Light
-
LetFixFlexible tile adhesive - Light
-
LetFix UniversalFlexible tile adhesive - Light
-
CombiQuickFixRapid setting flexible tile adhesive
-
QuickFix premiumRapid-setting natural stone adhesive
-
FlexFixRapid-setting flexible natural stone adhesive
-
CombiFixFlexible tile adhesive
-
NormalFixTile adhesive
-
FlexBinder
-
UniversalPrimerImproves adhesion in preparation for Alfix levelling compounds and tile adhesives on dense, non-absorbent substrates. Rollable consistency
-
ReadyFlexReady mixed tile adhesive
-
C2 EpoxyAcid-resistant grout and tile adhesive
-
Thixotropic agentAdditive for Alfix C2 Epoxy
-
Montagelim1-component all-round mounting adhesive
-
-
-
FineFuge - CeraFill 5Fine grout
-
QuickFuge - Premium 8Rapid-setting natural stone grout
-
UniversalFuge - CeraFill 10Universal grout
-
IndustryFuge - CeraFill 18High-strength grout
-
RustiqFuge - CeraFill 20Wide joint grout
-
M-SiliconHighly elastic sealant
-
C2 EpoxyAcid-resistant grout and tile adhesive
-
Thixotropic agentAdditive for Alfix C2 Epoxy
-
EpoxyFuge 10252-component flexible, epoxy-based pool grout
-
Montagelim1-component all-round mounting adhesive
-
-
-
DuraPuds 615Water repellent plinth render
-
DuraPuds 650 rapidRapid-hardening repair and levelling render
-
DuraPuds 703Through coloured thin coat finishing mortar
-
DuraPuds 710Thin coat bonding mortar
-
DuraPuds 804Flexible, through-coloured thin coat finishing mortar
-
DuraPuds 810Flexible fibre render
-
DuraPuds 830Flexible facade adhesive - Light
-
DuraPuds 800 SRSilicone resin-based facade render
-
DuraDec 8000 SRSilicone resin-based facade paint
-
Accessories for DuraPuds
-
Epoxy Primer
Retailers
Product information
Product
2-part epoxy resin system scattered with dry quartz sand, grain size 0.32 – 0.71 mm (type 1)
Coverage
200 – 300 g/m² + approx. 2.5 kg sand.
Packaging
5 kg units containing matching volumes of each component, A and B.
Sand is available in 25 kg bags.
Technical data
- Working temperature
- +10°C - +30°C
- Working time
- 30 minutes at +20°C
- Drying time/curing
- After 16 hours at +20°C further treatment can be initiated
- Shrinkage
- None
- Shelf life
- Approx. 12 months, dry and not below +10°C in unopened packaging
Technical enquiries
Produktinfo for:
• Alfix Epoxy Membran
Brochuren: Bassin - Flisebeklædning i svømmebadsanlæg
Sikkerhedsdatablad
Arbejdstilsynets bekendtgørelse nr. 1793 af 18.12.2015.
Arbejdstilsynets vejledning 9.3.3 af 28.11.2019
I tvivlstilfælde, kontakt vores Service-tekniske afdeling.
For seneste ajourførte udgave af dette datablad, besøg alfix.com
Application
For regular cleaning and maintenance of e.g. terracotta, unglazed ceramic tiles, marble, and natural stone.
Further for pore filling of absorbent surfaces.
Application
Surfaces
Concrete in situ and concrete slabs, older than 3 months.
Cohesive strength should be min. 1.5 N/mm²
Surface preparation
The surface should be dry, dimensionally stable, sound, clean and free from dust and laitance. There
should be no blooms or crack formations. Surface evenness of +/- 2 mm when using smoothing board,
Residues from grease or soap can be removed with Alfix Deep Cleaner.
How to use
Add full content of component B into component A and mix the two components using slowly rotating
paddle attached to electric drill. Mix thoroughly for approx. 3 minutes.
Working time is approx. 30 minutes at +20°C
Apply by short pile paint roller to an evenly penetrating coat with coverage of 200 – 300 g/m².
Scatter with dry quartz sand, type 1, over the still wet coating of Alfix Epoxy primer until the surface is
completely saturated and will provide a sandpaper-like finish.
NB!
Both substrate and working temperature should be ranging between +10°C - +30°C.
Avoid working in direct sunlight.
According to Danish legislation, working with epoxide products requires special training.
Finishing
Remove any excess and loose sand by sweeping or vacuuming the surface. Any further treatment with
Alfix Epoxy Membrane cannot be made until the primer is fully cured, allow min. 16 hours.
Cleaning
Residues from Alfix Epoxy primer on tools should be removed immediately upon use with ethanol. Once
cured, primer can only be removed mechanically.